CLONNING TUTORIALS .

[PLUTUS]

Understanding How Clone Cards Work:

Necessary Equipment:
- X2.5 Package: Includes JcopEnglish, ARQC_GEN, BPTOOLS (CryptoCalculator), IST USA 2023 Package, Cardpeek, and detailed tutorials.
- MSR Device: A magnetic stripe reader/writer.
- Omnikey 3021 or 3121: Smart card readers.
- ATR Tool: For initializing card ATR.
- JCOP Unfused or Pre-Initiated Java Cards: These can range from $5 to $20 per blank card. Use JCOP Manager software to check if your card is fused or unfused.

These components are available on platforms like Amazon, Aliexpress, and eBay.

Step-by-Step Process:

1. Erase and Format the Card
- Use JcopEnglish to erase and format the blank card. Wait for a success message for both operations.

2. Initialize the Card ATR
- Use ATRTOOL to initialize the card ATR. Ensure the ATR matches the dump card type.

3. Verify Card ATR
- Use CardPeek to check if the card’s ATR has changed. Select EMV and press Analyze. The card should display bank details like VISA or Mastercard, not "Java Blank."

4. Write Track Data
- Use MSRX to enter Track Two data and generate Track One data using the Omerta Generator Website.
- Write Tracks 1 and 2 to the card’s magnetic stripe. Swipe the card three times to ensure data is correctly written.

5. Generate Track Data for Low Security Dumps
- For 101 and 121 dumps, use MSRX and enter Track Two. Generate Track One using omerta.cx/trackgen/index.php.
- Follow additional steps for 201, 221, etc., for cards with chips.

6. Configure EMV Data
- Open X2.5, select the EMV tab, and enter the following:
- Track 2 data
- AID (e.g., 31010 or 41010)
- PIN, currency code, country code, and cardholder’s name
- Track 1 discretionary data
- Application label from CardPeek

7. Update Pref Name and Expiration Date
- Update the preferred name and expiration date. For the expiration date, find the last day of the expiration month (e.g., October 31st for October).

8. Complete EMV Configuration
- Select the appropriate plugin (VISA, MC, AMEX) and ensure all necessary fields are included.
- Press "Change Data" to finalize the setup.

9. Load IST Data
- Copy the EMV data to the IST Load page in X2.5.
- Ensure the IST file matches the card’s BIN (first 6 digits). Use real card details or valid dumps from trusted sources.

10. Generate ARQC Codes
Option One: Using Arqc_Gen
- Enter the PAN (first 16 digits of Track 2) in Arqc_Gen and generate ARQC codes.
- Enter these codes into X2.5 for ARQC 1, 2, and 3 slots.

Option Two: Using BP-Tools Crypto Calculator
- Select the appropriate application (VSDC for VISA, Mastercard Issuer App for Mastercard).
- Enter the PAN and generate ARQC codes by updating the ATC values sequentially (0001, 0002, 0003).
- Enter these codes into X2.5 for ARQC 1, 2, and 3 slots.

11. Finalize and Burn the Data
- Press "BURN" in X2.5 to finalize the card. The card is now ready for use at ATMs and POS machines.

Troubleshooting Common Issues:

Potential Reasons for Failure:
- Bad Dump: Fake, used, or empty balance. Always use fresh dumps from reliable sources.
- Old Dump: Ensure the dump is active and used before the cardholder attempts another ATM transaction.
- Mismatched ATR/IST: The ATR and IST must match the dump type. Use valid IST files corresponding to the card type.

CONTACT ME ON TELEGRAM @bugatecj for your cloning softwares

P L U T U S

Legit deals only

t.me

 

[MorrissDor]

Wbzv Kevin, the world s tallest male dog, dies soon after setting the record
While artificial intelligence has broad applications across many different fields, experts are now worried about it being used to spread disinformation.Areportfrom the research firm Graphika highlights a new Chinese propaganda campaign called Spam-o-flouge. It s using life-like AI figures to promote the interests of the Chinese Communist Party and di stanley cup screditing American ideals.The software was created by the artificial intelligence firmSynthesiaand allows you to generate videos from plain text in minutes. It s been used by more than 40,000 co stanley cup mpanies worldwide for things like consulting, video blogs and advertising, according to the company s website.But now it s raising concerns that AI like Synthesia s is being used as a tool to spread disinformation.The technology is so sophisticated that AI-generated avatars can even have debates amongst themselves.Siwei Lyu, a computer science and engineering professor at the University at Buffalo, says the situation is raising major concerns, but there are things that can be done to combat AI disinformation. I think most importantly, the governm stanley cup ent should invest more in counter-technologies that can help people improve their awareness and resi Ccgo Job Corps pitches in for Bitterroot winter Special Olympics games
RIVERSIDE, Calif. 鈥?Authorities in California believe theyve solved a 25- jordan year-old cold case rape.The Riverside Police Department announced Friday that officers had apprehended 49-year-old Ralph Leslie Kroll in connection with the sexual assault of an 18-year-old woman in October 1995.Police say the victim was walking when she was attacked by a stranger, forced into a nearby apartment complex and assaulted.Investigative leads were exhausted and it remained a cold case until police say DNA evidence was able to identify Kroll as a suspect.After obtaining an arrest warrant for Kroll, police teamed up with the U.S. Marshals Service to locate and arrest him at his Eastvale home on Thursday. Kroll was then booked into the Robert Presley Detention Center on charges of rape by force, kidnapping, and the use of a deadly weapon by a sex offender. He s being held on a $1 million bail.Anyone with additional information regarding this investigation and arrest should contact Detective Karla Beler at 951 353-7138 or [email protected]. Copyright 2020 Scripps Media, Inc. All rights reserved. This adidas originals material may not adidas og be published, broadcast, rewritten, or redistributed.

 

[PLUTUS]

Understanding How Clone Cards Work:

Necessary Equipment:
- X2.5 Package: Includes JcopEnglish, ARQC_GEN, BPTOOLS (CryptoCalculator), IST USA 2023 Package, Cardpeek, and detailed tutorials.
- MSR Device: A magnetic stripe reader/writer.
- Omnikey 3021 or 3121: Smart card readers.
- ATR Tool: For initializing card ATR.
- JCOP Unfused or Pre-Initiated Java Cards: These can range from $5 to $20 per blank card. Use JCOP Manager software to check if your card is fused or unfused.

These components are available on platforms like Amazon, Aliexpress, and eBay.

Step-by-Step Process:

1. Erase and Format the Card
- Use JcopEnglish to erase and format the blank card. Wait for a success message for both operations.

2. Initialize the Card ATR
- Use ATRTOOL to initialize the card ATR. Ensure the ATR matches the dump card type.

3. Verify Card ATR
- Use CardPeek to check if the card’s ATR has changed. Select EMV and press Analyze. The card should display bank details like VISA or Mastercard, not "Java Blank."

4. Write Track Data
- Use MSRX to enter Track Two data and generate Track One data using the Omerta Generator Website.
- Write Tracks 1 and 2 to the card’s magnetic stripe. Swipe the card three times to ensure data is correctly written.

5. Generate Track Data for Low Security Dumps
- For 101 and 121 dumps, use MSRX and enter Track Two. Generate Track One using omerta.cx/trackgen/index.php.
- Follow additional steps for 201, 221, etc., for cards with chips.

6. Configure EMV Data
- Open X2.5, select the EMV tab, and enter the following:
- Track 2 data
- AID (e.g., 31010 or 41010)
- PIN, currency code, country code, and cardholder’s name
- Track 1 discretionary data
- Application label from CardPeek

7. Update Pref Name and Expiration Date
- Update the preferred name and expiration date. For the expiration date, find the last day of the expiration month (e.g., October 31st for October).

8. Complete EMV Configuration
- Select the appropriate plugin (VISA, MC, AMEX) and ensure all necessary fields are included.
- Press "Change Data" to finalize the setup.

9. Load IST Data
- Copy the EMV data to the IST Load page in X2.5.
- Ensure the IST file matches the card’s BIN (first 6 digits). Use real card details or valid dumps from trusted sources.

10. Generate ARQC Codes
Option One: Using Arqc_Gen
- Enter the PAN (first 16 digits of Track 2) in Arqc_Gen and generate ARQC codes.
- Enter these codes into X2.5 for ARQC 1, 2, and 3 slots.

Option Two: Using BP-Tools Crypto Calculator
- Select the appropriate application (VSDC for VISA, Mastercard Issuer App for Mastercard).
- Enter the PAN and generate ARQC codes by updating the ATC values sequentially (0001, 0002, 0003).
- Enter these codes into X2.5 for ARQC 1, 2, and 3 slots.

11. Finalize and Burn the Data
- Press "BURN" in X2.5 to finalize the card. The card is now ready for use at ATMs and POS machines.

Troubleshooting Common Issues:

Potential Reasons for Failure:
- Bad Dump: Fake, used, or empty balance. Always use fresh dumps from reliable sources.
- Old Dump: Ensure the dump is active and used before the cardholder attempts another ATM transaction.
- Mismatched ATR/IST: The ATR and IST must match the dump type. Use valid IST files corresponding to the card type.

CONTACT ME ON TELEGRAM @bugatecj for your cloning softwares

P L U T U S

Legit deals only

t.me

Fresh High Quality dumps with pin available . us , ca,fr ,uae and uk ....DM @bugatecj on telegram